nivomat-improvement-kit-33-007-82-2062-682

Service-Informatio&n Group: 33 June Bulletin No. Rear Wheel Drive 1982 33 007 82 (2062) – For U.S.A. and Canada only – RE: NIVOMAT IMPROVEMENT KIT Dear Dealer: After extensive testing, we are pleased to make available a helper spring kit for all Nivomats (with exception of the latest 1982 Nivomat identified by a black bottom leg stamped “L”). This kit is available under Part No. Yours truly, f E;t–1WO F .NORTH .AMERICA, INC. ‘r r ‘ \~Jv~J Herb Neas National Service Manager HN/vaa enclosure Please route and initial before filing r-,, – …… ~ …. …, ft II,.,,~,…,~.,..,,,.. 33 53 2 301 787 I ( ( Bulletin No.: 33 007 82 (2062) Page 2 DISMANTLING Lift the support disc (3) away as shown by the arrow, release snap ring (2) and remove both components downwards together with spring centering plate (5), coil springs (7) and (8) and flexible gaiter (9). To free the sealant at the screw connection between piston rod and retaining eye, heat the joint area to approx. 250° c. Hold the piston rod in the special jaws (faces absolutely clean) and unscrew retaining eye (1) while hot. The eye (1), cup (4), centering plate (5) and r.ubber buffer (6) can be discarded; they are replaced by the parts stated in “Assembly.” rn-11 , 5l -==:;:::::=>—21 Bulletin No.: 33 007 82 (2062) Page 3 CLAMPING (for dismantling/assembly) Jaw position (as low as possible to avoid compressing the hollow drilled shaft.) 1~1/1–7’1 ~ Material: Aluminium (