-
large-engine-protection-plate-51-001-88-2302-488
Service-Information Motorcycle Group: 5, BMW NA Service Department Equipment April, 1988 51 001 88 (2302) For USA Only RlOOGOS ptional Large Engine Protection Plate Problem: Part No.: Action: Solution: The screws that mount the optional large engine protection plate may loosen when the motorcycle is operated at continuous high engine speeds. 51 47 2 303 560 Far this reason, do not install this protection plate as supplied. Notify any customers that currently have this plate installed on their Rl00GSs and reinstall the original engine protection plate. An improved protection plate mounting is being developed for the Rl0OGS. You will be…
-
battle-of-legends-decal-install-51-004-93-2577-293
( Service-InformationM otorcycle ©BMW of N.A. Service Department Group: 51 Equipment February, 1993 51 004 93 (2577) Installation of “Battle of the Legends” Decals For USA Only Many technicians are reluctant to attempt installation due to the potential of not getting the decals on straight or damaging them. Using the following instructions will allow you to move the decal after placing it on the tank. Hint: Apply the decal at room temperature. The motorcycle fuel tank should also be at room temperature for a few hours prior to installation. Instructions: Tank Decals -Wash and dry the surfaces to which the…
-
fairingfuel-tank-graphic-install-51-003-92-2510-292
, .. ( ….. Service-InformationM otorcycle eMw NA Service’; pepartment • Instal11ng Fairing or Fuel Tank ·,raphics ~ :Al.l·eM odels Problem: Decals are difficult to install. Many dealers are reluctant to install them due to the potential of not getting the graphics on straight. Remedy: Following the instructions below will allow you to position the decals properly. The instructions are for installation of Kl graphics, which are the most difficult to install. However, the same instructions will apply to all decals. ·.• – Wash and dry the motorcycle …. …. . Make a mild solution of liquid soap and water…
