-
Main Bearing Installation Tool – XIV/91 – 5/91
( Service-InformationM otorcycle BMW NA Service Department Group: 3 Equipment Advice May 1991 XIV/91 (H54) For USA Only Main Bearing Installation Special Tool ■ – All Boxer Model ■ The following tools are available through normal parts channels. The uses of these Drill Bits and Reamer are described in the Repair Manual microfiche for all Boxer models: 88 88 6 999 040 – 4-■ Reamer 88 88 6 000 039 – 3,9 mm Drill Bit 88 88 6 000 038 – 3.8 mm Drill Bit 88 88 6 000 032 – 3,2 mm Drill Bit Very truly yours, BMW of…
-
Special Tools – III/85 – 8/85
Service-Information Motorcycle BMW of N.A. Service Department Group: 3 Equipment Advice RB0 & RB0RT Special Tools August 1985 III/85 (2164) For USA and Canada Only Due to the change in 1985 model Boxer fork tube dimensions, the tools listed below have been added to the special Boxer tool listing. (See illustrations on reverse side.) Tool No. 88 88 6 314 740: Assembly bushing for installing the damper assembly into the fork tube Tool No. 88 88 6 314 670: Arbor drift for installing fork seals into the fork slider Decals with hooks and screws are available for these two special…
-
Special Tools – XXIX/92 – 12/92
( Service-InformationM otorcycle BMW NA Service Department Group: 3 Equipment Advice December, 1992 XXIX/92 (2564) For USA Only Special Tools – R and K Models Information: Note: Very truly yours, Attached are drawings of new special tools. Each drawing has the tool part number and a description of the tools application. -A Service Information is being prepared to described tool (31 4 890). -Special tool (13 0 900) and (31 0 910) are used to set CO on R models with pulse air systems. Since a CO meter is a required tool, these adapters will be sent to each dealership…
