(
(
-, 1 • • ._. . r”•1 “‘.,~,. ‘.._ …… ~ •• .,_ •• , I •• •••·•• •
Service-Informatio0n
Group 36 February Bulletin No.:
Wheels and Tires 1984 36 020 84 (2094)
– For U.S.A. and Canada Only –
RE: TIRE CLEARANCE
ALL MODELS EXCEPT R80GS AND R80ST
Dear Dealer:
t.
Occasionally, we r~’ceive inquiries of””insuff:t’~isnt
clearance between the rear swi11g.ar~; and tire/ particularly
on motor.cycles before model year;.;,1981’~: – – .. ,_-t··- •··· ,
:.. ~-·–. .;. -·~..;• :./-~·-_.
Therefore, a thrust· sle.eve 10 ~ 7mn· l~ng)ias •. been-_develo~_~d
to install on the rear wheel drive side-: of the7WheeT • .. ••
hub. This sleeve can ·be installed in” place of· the~· •
standard 9. 2mm long sleeve if more clearance.· “:t;s;_:n ~~aed.
The sleeve can be ordered through normal part_s:: cnaiinels
under part number 36 31 2 301 737. • •
WARNING: If the wider sleeve is installed, the
motorcycle’s wheel track must always be
checked with the wheel alignment gauge and
adjusted if necessary to a maximum of
4mm offset.
2
The line drawing below shows the position of the
longer 10.7mm thrust sleeve.
Si.ncerely,
EMW OF NORTH AMERICA, INC.
Richard Dampf
National Technical Manager
Motorcycle Group
10,7
Thrust sleeve
36 31 2 301 737
36 020 84 (2094)
(
About the Service Bulletin Archive
Searchable index of BMW service bulletins for repair and parts installation for a variety of 247 models. This is not an exhaustive list. If you have ones to share to help complete the archive, please contact us directly.