Service-Informatio&n
Group: 34 November Bulletin No.:
BRAKES 1982 34 003 82 (2063)
– For U.S.A. and Canada Only –
RE: FRONT BRAKE DISK MOUNTING
Dear Dealer:
It has come to our attention that in isolated cases the
the mounting bolts of the brake disk to the wheel become loose.
NOTE: THIS OCCURS ONLY ON SINGLE FRONT DISK MODELS
Therefore, may we ask you to, in addition to all normal
inspections or on pre-delivery service, to inspect the
5 mounting bolts of the brake disk.
In case you find loose screws, please replace the washers
(Part No. 34 11 1 240 570, of 34 11 1 232 417 with 5 holes)
with new washers (Part No. 33 31 1 108 204)· on both sides of
bolt.
5
‘
2 4
I
Torque all bolts/nuts to 22 + 2 Nm (16 + 1.5 ft.lb.). If a
suspect brake disk has been loose for some time during operation
of the motorcycle, it is also advisable to check the wheel
flange for deterioration. If the flange is damaged, the entire
wheel must be changed.
Please route and initial before filing
C:an,il”‘o \flJritor
(
(
Bulletin No. 34 003 82 (2063) November 1982
Reimbursement to you is made under normal warranty procedures,
but under a special defect code number:
00 00 34 00 00
Flat rate labor is:
Exchange of washers 4 FU
Wheel exchange (including
removal and installation
of wheel and tire,
balancing and modification
of brake) 11 FU
Multiple conversions can be claimed on one claim form;
however, you must list all vehicle identification numbers
separately on the bottomof the form.
Thank you for your support.
Yours truly,
BMW OF NORTH AMERICA, INC.
@21
H. Neas
National Service Manager
HN/cs
(
About the Service Bulletin Archive
Searchable index of BMW service bulletins for repair and parts installation for a variety of 247 models. This is not an exhaustive list. If you have ones to share to help complete the archive, please contact us directly.