BMW Service Bulletin Archive

flywheel-bolt-torque-11-049-01-2495-1191

Service-InformationM otorcycle BMW NA Service Department Group: 11 Engine Clutch Carrier {Flywheel) Bolt Novembe1r 991 11 049 91 (2495) Tightening Torque – {All Boxer Models – 1981 on) For USA Only Information: In a few isolated cases, loose or insufficiently torqued bolts have been detected. Change: Previously, the tightening torque was: Note: 73 ft/lb or 100 Nm The tightening torque has been increased to: 90 ft/lb or 125 Nm – Clean the threads on the bolts and in the crankshaft. – Apply a light coating of engine oil prior to torqueing. These expansion bolts will not reach their limit of elasticity at this torque. Therefore, they can be re-used. Very truly yours, BMWof North America, Inc. Frank Stevens National Service Manager Motorcycle Group FS:jel/489.3 Please initial and route to the following before filing Richard Dampf National Technical Manager Service I Parts I Sales I Warranty I Technicians (

About the Service Bulletin Archive

Searchable index of BMW service bulletins for repair and parts installation for a variety of 247 models. This is not an exhaustive list. If you have ones to share to help complete the archive, please contact us directly.