accessory-socket-fuse-61-016-88-2301-488

Service-InformationM otorcycle BMW NA Service Department Group: 61 General Electrics Apri 1 , 1988 61 016 88 ( 2301) For USA Only Accessory Socket Fuse – RlOORaSn d RlOORMT odels Problem: Remedy: Warranty: Warranty Claim: Very truly yours, No electrical current (12 volts) at the accessory socket ( BMWB attery Charger does not charge through the socket). The fuse holder on some models was assembled incorrectly. The small spring which tensions the lug into the fuse was installed 0n the wrong side of the wire lug. This restricts the flow of current throu9h the fuse holder assembly by making a poor contact to the fuse. \ Install spring here Remove the fuse spring from the plastic holder. Pull on the wire end lug slightly, exposing 1 inch of the wire. Wind the small spring onto the wire between the wire end and plastic holder. ~!ind the spring in a manner similar to winding a key onto a key rirrg, or use a soldering iron to unsolder the lug. Position the spring over the wire and solder the lug on again. tabor is reimbursable under the BMWLi mited Motorcycle Warranty of Three {3) Years/Unlimited ~iles. Submit a normal warranty claim using: Defect Code: Flat Rate Code: Flat Rates: Comments: 6100007700 0000000 WT= l FR= (5 min.) Fuse holder assembled incorrectly BMWO F NORTAHM ERICAIN, C. (0;~~ Frank Stevens Richard Dampf National Service Manager National Technical Manager